PENON TAIL

Jackson Hui

3 years ago

Penon TAIL HiFi Portable Type-C to 3.5mm/4.4mm Headphone Amplifier with Gain Button

Description

Penon TAIL is a HiFi digital audio decoding PCBA solution USB dongle.

Built-in USB audio bridge chip and dual-channel low-power high-performance Dual CS43131 DAC decoding chip.

Up to support PCM 384 kHz/32Bit and DSD256 digital audio codec. Select ultra-low noise power supply and high precision femtosecond crystal oscillator to further improve the performance parameters and sound quality.

Integrated 4.4 mm all balanced differential output and 3.5 mm stereo output, load support 16Ω ~ 600Ω, the output two gain switch control, can be perfect fit all kinds of earphones.

Volume button and play/pause in-one button and three independent (Vol±, Play/Pause) button compatible design, easy to listen to music control; With PCM and DSD light effect.

Excellent compatibility of mobile phones, it has been verified to support PC, Android, iOS device.

Specification

Model: TAIL

Chip: dual CS43131

DAC: DSD64, DSD128, DSD256

Decoding rate: PCM 384KHZ/32bit and below

USB port: TYPE-C

USB protocol: UAC2.0 protocol, UAC1.0 protocol

Support Impedance: 16-600Ω

Output: 3.5mm audio + 4.4mm balanced

Frequency response: 20Hz-20kHz

SNR: 130dB@4.4mm/ 4Vrms,125B@3.5mm/ 2Vrms

THD+N: -103dB@4.4mm /4Vrms,100B@3.5mm/ 2Vrms

Crosstalk suppression: -135dB@4. 4mm/ 4Vrms, -85B@3.5mm/ 2Vrms

High precision femtosecond crystal oscillator: 100fs

Output performance

3.5mm output(low gain) 32Ω @1kHz, connect with PC

Impedance: 32Ω @1kHz

Output level: minimum: 900mV, 25.3mW; typical: 1000mV, 31.25mW; maximum: 1200mV, 45mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -100dB, maximum -95dB

SNR: minimum 110dB, typical 120dB, maximum 130dB

DNR: minimum 110dB, typical 120dB, maximum 130dB

Crosstalk: minimum -65dB, typical -60dB, maximum -55dB

3.5mm output(high gain) 600Ω @1kHz, connect with PC

Impedance: 600Ω @1kHz

Output level: minimum: 1800mV, 5.4mW; typical: 2000mV, 6.67mW; maximum: 2200mV, 8.07mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -100dB, maximum -95dB

SNR: minimum 115dB, typical 125dB, maximum 135dB

DNR: minimum 115dB, typical 125dB, maximum 135dB

Crosstalk: minimum -95dB, typical -85dB, maximum -75dB

4.4mm balanced output(low gain) 32Ω @1kHz, connect with PC

Impedance: 32Ω @1kHz

Output level: minimum: 1800mV, 101.25mW; typical: 2000mV, 125mW; maximum: 2200mV, 151.25mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -103dB, maximum -100dB

SNR: minimum 120dB, typical 125dB, maximum 130dB

DNR: minimum 120dB, typical 125dB, maximum 130dB

Crosstalk: minimum -110dB, typical -105dB, maximum -100dB

4.4mm balanced output(high gain) 600Ω @1kHz, connect with PC

Impedance: 600Ω @1kHz

Output level: minimum: 3800mV, 24.07mW; typical: 4000mV, 26.67mW; maximum: 4200mV, 29.4mW

Penon TAIL HiFi Portable Type-C to 3.5mm/4.4mm Headphone Amplifier with Gain Button

Description

Penon TAIL is a HiFi digital audio decoding PCBA solution USB dongle.

Built-in USB audio bridge chip and dual-channel low-power high-performance Dual CS43131 DAC decoding chip.

Up to support PCM 384 kHz/32Bit and DSD256 digital audio codec. Select ultra-low noise power supply and high precision femtosecond crystal oscillator to further improve the performance parameters and sound quality.

Integrated 4.4 mm all balanced differential output and 3.5 mm stereo output, load support 16Ω ~ 600Ω, the output two gain switch control, can be perfect fit all kinds of earphones.

Volume button and play/pause in-one button and three independent (Vol±, Play/Pause) button compatible design, easy to listen to music control; With PCM and DSD light effect.

Excellent compatibility of mobile phones, it has been verified to support PC, Android, iOS device.

Specification

Model: TAIL

Chip: dual CS43131

DAC: DSD64, DSD128, DSD256

Decoding rate: PCM 384KHZ/32bit and below

USB port: TYPE-C

USB protocol: UAC2.0 protocol, UAC1.0 protocol

Support Impedance: 16-600Ω

Output: 3.5mm audio + 4.4mm balanced

Frequency response: 20Hz-20kHz

SNR: 130dB@4.4mm/ 4Vrms,125B@3.5mm/ 2Vrms

THD+N: -103dB@4.4mm /4Vrms,100B@3.5mm/ 2Vrms

Crosstalk suppression: -135dB@4. 4mm/ 4Vrms, -85B@3.5mm/ 2Vrms

High precision femtosecond crystal oscillator: 100fs

Output performance

3.5mm output(low gain) 32Ω @1kHz, connect with PC

Impedance: 32Ω @1kHz

Output level: minimum: 900mV, 25.3mW; typical: 1000mV, 31.25mW; maximum: 1200mV, 45mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -100dB, maximum -95dB

SNR: minimum 110dB, typical 120dB, maximum 130dB

DNR: minimum 110dB, typical 120dB, maximum 130dB

Crosstalk: minimum -65dB, typical -60dB, maximum -55dB

3.5mm output(high gain) 600Ω @1kHz, connect with PC

Impedance: 600Ω @1kHz

Output level: minimum: 1800mV, 5.4mW; typical: 2000mV, 6.67mW; maximum: 2200mV, 8.07mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -100dB, maximum -95dB

SNR: minimum 115dB, typical 125dB, maximum 135dB

DNR: minimum 115dB, typical 125dB, maximum 135dB

Crosstalk: minimum -95dB, typical -85dB, maximum -75dB

4.4mm balanced output(low gain) 32Ω @1kHz, connect with PC

Impedance: 32Ω @1kHz

Output level: minimum: 1800mV, 101.25mW; typical: 2000mV, 125mW; maximum: 2200mV, 151.25mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -103dB, maximum -100dB

SNR: minimum 120dB, typical 125dB, maximum 130dB

DNR: minimum 120dB, typical 125dB, maximum 130dB

Crosstalk: minimum -110dB, typical -105dB, maximum -100dB

4.4mm balanced output(high gain) 600Ω @1kHz, connect with PC

Impedance: 600Ω @1kHz

Output level: minimum: 3800mV, 24.07mW; typical: 4000mV, 26.67mW; maximum: 4200mV, 29.4mW

Frequency response: 20-20kHz

THD+N: minimum -105dB, typical -103dB, maximum -100dB

SNR: minimum 125dB, typical 130dB, maximum 135dB

DNR: minimum 125dB, typical 130dB, maximum 135dB

Crosstalk: minimum -140dB, typical -135dB, maximum -130dB

Package

Penon TAIL